Gyratory Compactor

Gyratory Compactor

This Gyratory Compactor is used to simulate and reproduce the real compaction conditions under actual road paving operations, hence determining the compaction properties of the asphalt.

Rotary compaction displacement range: 0 ~ 250mm.
Height range of formed test piece: 30-170mm.
Rotary compaction displacement accuracy: less than 0.10 mm.
Rotary compaction angle: 0 ° ~ 2 ° ± 0.02 ° adjustable, factory set as 1.16 ° ± 0.02 ° (internal angle)
rotary compaction pressure: 0 ~ 1000kPa adjustable, factory setting is 600kpa ± 3%.
rotation speed: 0-50r / min adjustable, factory setting: 30 ± 0.3r/min.
spinning times: 0 ~ 999 times.
size of trial mold: standard configuration: ø150 mm, can be customized to ø100 mm.
pressure application mode: pneumatic.
Instrument net size: length 900mm × width 700mm × height 1800mm.
dimension of outer packing box of instrument: 1000mm long × 800mm wide × 1950mm high.
Voltage: 220V± 10%  single phase  50Hz/60 Hz
Air pump voltage: 380V three-phase